<article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" article-type="Research Article" dtd-version="1.0"><front><journal-meta><journal-id journal-id-type="pmc">iarjet</journal-id><journal-id journal-id-type="pubmed">IARJET</journal-id><journal-id journal-id-type="publisher">IARJET</journal-id><issn>2708-5163</issn></journal-meta><article-meta><article-id pub-id-type="doi">10.47310/iarjet.2021.v02i02.016</article-id><title-group><article-title>Study of Reinforced Concrete Beams with Fiberglass in the Support Area</article-title></title-group><contrib-group><contrib contrib-type="author"><name><given-names>IbrahimHamed</given-names><surname>Zayed</surname></name></contrib><xref ref-type="aff" rid="aff-a" /></contrib-group><aff-id id="aff-a">Master Student at Yanka Kupala State University of Grodno, Belarus</aff-id><abstract>This paper aim to this study are fiberglass transverse reinforced GFRP and carbon FibArmTaptape and reinforced concrete bending beams and were collected 3 RIENFORCED CONCRETE BEAMS In carrying out this work, experimental methods were used to study the mechanical properties of composite materials, bearing capacity, crack resistance, and deformability of the reinforced concrete girder.&amp;nbsp;Externally reinforced concrete beams with GFRP slabs were tested to failure using a two-point symmetric static loading system where two sets of beams were poured for the pilot test program and no fibers were added to the first beam to be compared with other fiber-armed beams and To obtain some physical properties of the fiber strips as the maximum tensile stress they can withstand, and its modulus of elasticity.</abstract></article-meta></front><body /><back /></article>